Meny
Hem
Aluminiumpersienner ALU Persienner - Enkel 16mm Aluminiumpersienner 25mm Aluminiumpersienner 35mm Aluminiumpersienner 50mm Aluminiumpersienner Träpersienner 25mm Träpersienner 35mm Träpersienner 50mm Träpersienner Bambupersienner 25mm Bambupersienner 35mm Bambupersienner 50mm Bambupersienner 65 mm Bambupersienner Speciellt för takfönster Kassettrullgardin RBR-DL (Dekolux) för takfönster ANV Kassettrullgardin RBR-FDZ-Premium för takfönster Rullgardiner Rullgardiner Rullgardiner system RT RBS - Rullgardiner med fjädermekanism Rullgardins-dukar som Metervara Kassettrullgardin UNI Kassettrullgardin (Uni) Kassettrullgardiner Absolute CASC - Kassettrullgardin (Absolute) S CAMC - Kassettrullgardin (Absolute) M CALC - Kassettrullgardin (Absolute) L Duo Rullgardiner Duo Rullgardiner Lamellgardiner VBB - Lamellgardiner Basic VBE - Lamellgardin Enigma Rak VBS - Lamellgardin Enigma för sneda fönster VBT - Tyglameller för lamellgardin Plisségardiner Plisségardiner 20 mm Vegas Plisségardiner 20 mm Rippo Plisségardiner Cosiflor Plissé 20 mm Cosiflor F1 Plisségardin Cosiflor VS1 Plisségardin Cosiflor VS2 Plisségardin Cosiflor VS2-SC Plissé 20 mm Cosiflor VS4S Plissé 20 mm Cosiflor VS5 Plissé 20 mm Cosiflor FS1 / FS2 Plissé 20 mm Cosiflor-VS10 Plissé 20 mm Cosiflor FS3 Plissé 20 mm Cosiflor FE motoriserad DC Plisségardin Cosiflor PL11 Myggnät Myggnät-i-ram-gör det själv Myggnät i kassett Vertikal PROJEKTORDUKAR Projektorduk som Metervara Panelgardiner Tygpaneler för Panelgardiner Panelgardiner Mörkläggningsgardiner Mörkläggningsgardin med Cosiflor Plisségardin Mörkläggningsgardiner med kassett UNI Gardinskenor elektriska

Measuring for blind installation

alt="Illustration of measuring for venetian blinds: measure width and height inside the window recess, check glass rebate depth and allow space for brackets to ensure proper fit"

How to Measure for Blinds

When ordering new blinds, it is essential to measure correctly. Below are instructions on how to measure for various mounting types. Remember that the “blind measurement” is always the total measurement, which includes the width of the headrail.

1. Inside Recess Mount (Inside the Window Frame)

For an inside recess mount (i.e., inside the window frame), provide the exact recess measurement for both width and height. In most cases, you should subtract about 1 cm (0.4 in) from the width so the blind does not rub against the frame and can move freely.

  • Width: Measure the window recess at the top, where the headrail will be installed. Subtract about 1 cm (0.4 in) from this measurement.
  • Height: Measure the total height of the window recess from top to bottom. Typically, no deduction is needed.
Tip: Always measure the recess in at least two places (width and height) to catch any irregularities. Use the smallest width to ensure the blind will not be too wide.

2. Outside Mount (Onto the Wall or Window Frame)

For an outside mount, the blind is installed on the wall above the window or on the window frame. Decide how far onto the wall or frame you would like the headrail to be placed.

  • Width: Measure the total desired width of the blind. Often, this is the window width plus a few centimeters (an inch or two) on each side for better coverage and aesthetics.
  • Height: Measure from the top mounting point to where you want the blind to end (e.g., the windowsill). You may wish to add a bit extra if you want complete coverage when the blind is fully lowered.
Tip: Check that there is enough space for the brackets, and that the blind will not interfere with window handles or other hardware.

3. Between Glass Mount (Intermediate Glass Blind)

Some blinds (often referred to in Swedish as “mellanglaspersienn”) are installed between the inner and outer panes of older or double-glazed windows.

  • Width: Measure the distance between the window sashes, noting the smallest width measurement at the top. Usually, no deduction is necessary if you are sure the blind will not rub against the sides.
  • Height: Measure the height between the two panes of glass at the bottom of the sash. In most cases, you can order the blind with the exact sash height.
Important: Ensure there is enough space between the glass panes so the blind can move freely without touching.

General Measuring Tips

Keep the following points in mind when measuring your windows:

  • Measure multiple times and use a quality measuring tape for accuracy.
  • If the window is not perfectly square, use the smallest measurement for width and the largest measurement for height.
  • Check for any obstructions that could affect how the blind operates (e.g., handles, air vents, or trim).
  • Be clear about whether you want the exact manufacturing width (the total blind width) or a finished size (accounting for any deductions). Different suppliers may handle this differently.

Information adapted from Persiennbutiken.se .

Cart

Your cart is empty.